question

jonnyhottub avatar image
jonnyhottub asked

Mppt disappears from easysolar

349c24dc-bc08-47ff-8a26-c6861ad2bc1f.png

I had successfully added a smart solar not to and easy solar 2. System via direct connect ports and it has been working very success fully over the last 4 days but this morning it’s disappeared from the system and UX display. I have tried connecting via usb and direct but nothing I have set mppt back to factory defaults but still not showing. I believe the two systems are linked via Bluetooth. I did add a display to the mppt last night. So I am at a loss. See pictures

034fb50f-f84f-4f65-b7ae-65738398810b.png

MPPT SmartSolarEasySolar All-in-One
349c24dc-bc08-47ff-8a26-c6861ad2bc1f.png (429.5 KiB)
034fb50f-f84f-4f65-b7ae-65738398810b.png (386.1 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@jonnyhottub

The smart network is designed for systems with no GX device.

The two together cause weird issues like the one you have. You will have to remove the smart network if you are using the GX.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jonnyhottub avatar image jonnyhottub commented ·

Thanks will try that

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic

EasySolar 1600 product page

EasySolar-II GX 3000 & 5000 product page