Hello, this morning the SOC value of my 2x Victron lithium batteries 25,6V/200Ah dropped from 78,5% to almost 0% out of the blue. See the following graphs;
Thanks in advantage for answering.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello, this morning the SOC value of my 2x Victron lithium batteries 25,6V/200Ah dropped from 78,5% to almost 0% out of the blue. See the following graphs;
Thanks in advantage for answering.
More information please.
The dip looks like it happened when there was a sudden demand, so fails when power assist happened. So they possibly switched off then on again.
Check the cell balance.
@Alexandra thanks for your answer, i cant see that there was a sudden demand for power on the AC-out, see the following graph;
The output power is constantly around the 550 W, the Victron Quattro is situated before all the connected users / devices.
The DC voltage was also very low see graph;
Every night the DC voltage did get lower for the past 7 days..
You may need to set it to keep batteries charged for a bit.
Have you seen the system go into sustain at all?
Additional resources still need to be added for this topic
ESS design and installation manual
Additional resources still need to be added for this topic
Did You Know - How to create a battery profile for non-Victron batteries?
61 People are following this question.