This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
Best Wishes to everybody for this new year.
I'm trying to connect a smart battery sensor with bluetooth to a Cerbo GX but It seems to be impossible to create a Ve.smart network with CerboGX. So how to do it ? is this sensor compatible with CerboGX ?
Thanks for your help
Bruno.
Hi Bruno,
No the emart battery sense has no communication with the cerbo. It is designed for non GX systems.
Thanks a lot for your quick answer.
Do you think it's possible to link the smart sensor to a smart device like Smart solar MPPT 150/85 via VE.smart network and then to link MPPT to CerboGX via VE.direct bus, so Cerbo gets temperature and battery voltage informations by this way ?
I’m think with voltage drop beinga consideration that the sbs should get an update to allow it to pair with the gx devices just like a ruuvi tav
The Smart Battery Sens is intended as a budget-friendly solution to monitor a battery and connect it via BT/Ve Network to, for example, a Smart MPPT.
You can monitor batteries via the Cerbo GX, for example, with a Smart Shunt or BMV.
