question

Alois Spacek avatar image
Alois Spacek asked

Parallel MP2 at one phase only

ed567e0f-51d0-40dd-9590-666e75a5eec4.pngHi, my setup 3phase MP2, 1,1,2, cerbo, shunt, 2xMPPT. After add second MP2, the mppt cant chrge. Must be ESS at all MP2 or in slave MP2 not? Many thanks at answer. L

mppt state
ed567e0f-51d0-40dd-9590-666e75a5eec4.png (122.9 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alois Spacek avatar image
Alois Spacek answered ·

And is some another reason for this case?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
@Siolaservice

I think phase balancing/ compensation is one of them. But I am sure there are a few more.

The system is going to be unstable and behave unexpectedly. Which is why it is not supported.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic