This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
My inverter isn't powering up properly, the red and green LEDs flash together once and then the green flickers a bit in an attempt to turn on but there is no pattern to it.
It seems people in this position need to calibrate, but if I bought the VE direct to usb cable would my computer are able to communicate with an inverter that isn't able to power up properly?
More information please?
What battery what phoenix what voltage?
Is your battery ok?
It will switch on if the battery is ok and able to supply the inrush current. You can program after that. Just dont connect to any charge sources until you do that part.
