This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
When we are away and our coach loses shorepower both AC units will try to run off inverter. My plan is to place a NC 12v coil relay in the rear AC line so that the MP2 relay could kill the rear AC and prevent an overload on inverter. Is this doable via the relay assistant? Will it be quick enough to prevent an overload? Thanks for any insight here.
You might also consider the ac output 2. This output is only power via shore power and disconnects on loss of shore power. Non essential loads.
Thanks, I considered that, poses some other issues in my application.
