question

nacho avatar image
nacho asked

Permanent red overload light on Phoenix inverter

Hola a todos, tengo un inversor Phoenix 12/250 que sin carga conectada me marca sobrecarga,

(Led rojo encencido permanentemente). El equipo de trabajo parece ser que funciona correctamente y se bloquea por dicha alarma.

Cuando pasa un tiempo el mismo comienza el proceso de revisión y bloqueo.

Siempre sin carga conectada. A veces con el led rojo permanente hay una secuencia de destellos del led verde.

Gracias por adelantado.

Phoenix Inverter
4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Paul B avatar image Paul B commented ·

Please advise your question in English

as this is a English forum

Reasons

1. its a english forum

2. so others can search all relevant questions

3. so that we all dont have to translate this using a translator


thanks


0 Likes 0 ·
nacho avatar image nacho commented ·


Hello everyone, I have a Phoenix 12/250 inverter that with no load connected makes me overload, (Red LED lit permanently). The work team seems to be working correctly and has been protected by this alarm. When time passes, the review and blocking process begins. Always with no load connected. Sometimes with the red permanent LED there is a sequence of flashes of the green LED. Thanks in advance.

0 Likes 0 ·
Show more comments
1 Answer
Paul B avatar image
Paul B answered ·

removed from unanswered list

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.