question

jonoci avatar image
jonoci asked

How do I determine in Node Red the status of my CerboGX two relays?

Cerbo GX with Fronius PV inv, 3x Multiplus inverters:

I can set and clear the two Cerbo relays - that works fine, but wish to determine the Cerbo state of the relays when I require.Is there a Node/flow that can do this already?

cerbo gxRelay
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @JoNoci

There is a input-relay node that reads the status of the GX device.

0 = Relay open

1 = Relay closed

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jonoci avatar image jonoci commented ·

@Stefanie

Thank You Stefanie - That does the job.

Much appreciated

Joe

0 Likes 0 ·

Related Resources

Cerbo GX product page

GX family product range

Cerbo GX & GX Touch datasheet

Cerbo GX Manual

Venus root access document

Additional resources still need to be added for this topic