question

testor90 avatar image
testor90 asked

Battery temperature

Dear Forum!

I have added the Batterytemperature Sensor to my ESS. (As provided with the MPII in the package)
Also connected it and activated everything in DVCC. Also I can see it in VRM.

But how, and where, do i set that the charging of my Batteries is stopped if below 5°C or above 40°C (dumb batterys, with external non communication BMS)

Sincerely.

Multiplus-IIbattery chargingTemperature Sensor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
snoobler avatar image
snoobler answered ·

Charger tab on VEConfig.

You need to have firmware 489 or higher and have the battery type set to Lithium.


2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

testor90 avatar image testor90 commented ·
Thank you very much,


i can only see the "stop charger below" window but not above


0 Likes 0 ·
Show more comments