question

sabresix avatar image
sabresix asked

BVM-712 Resetting History data without a full reset

On the BVM-712 Smart, there is a history tab on the I-Pad App. It would be good if you could clear individual historical parameters, eg voltage maximum and voltage minimum. At this time it looks like the only was is to do a complete "Reset to Defaults" which clears everything and then you have to program up the device again. Any help appreciated DS

BMV Battery Monitor
2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sabresix avatar image sabresix commented ·

Thanks Mark, that worked OK, now to wish for the feature on the I-Pad App.

0 Likes 0 ·
Mark avatar image Mark ♦♦ sabresix commented ·

Good to hear - yes I agree that that it would be great to incorporate the 'clear history' option into the VictronConnect app functionality.

0 Likes 0 ·
1 Answer
Mark avatar image
Mark answered ·

You should be able to reset the entire history on the actual BMV - but not individual parameters.

It's option #63 - see manual extract below;

This method will not reset any settings.


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.