This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
I have an Victron SmartSolar MPPT 150/85 A05A and Multi quattro 8000 yesterday it updated to v1.41 automatically; since the maximum charge current don´t work. Suddenly today it downgraded to v1.39 and the system don't work, it is in error 116 with input shutdown. Can you help me please?
Thanks!
Hi, you can’t downgrade a SmartSolar charger. Only BlueSolar Chargers can be downgraded.
There is really only one option to make the charger work again: disable the Charge current limit setting in your GX device. See Settings -> System Setup.
Then if that would lead to over charging, use VictronConnect to set lower individual limits on all solar chargers you have.
I expect to have more news about this on Monday. We’ll contact you from the support desk.
In the mean time, my apologies for the troubles. Matthijs
Ps1: you wrote that it updated automatically: thats impossible. Someone must have pressed a button somewhere.
Ps2: I’ll remove all other answers and comments; to keep this clean.
Yes. It is. Error 116 will go away. See change log
Hi, Is it possible to get the v1.41 file sent to me to get rid of an Error 116 on a Smartsolar 250-100 that was downgraded to 1.39 to get it working again?
Can I have the v1.39 file for BlueSolar 150/85 VE.Direct (A04F)? I'm having a similar issue. In addition, my Phoenix 48/375 (A214) no longer displays power output in CCGX since upgrading to v1.16 this evening. I would appreciate any downgrade file which reverses this problem.
