I have a victron quattro 48/8000 which has slow switchover during loadshedding in south africa.By, slow I mean a delay of about 10seconds. The delay is experienced when solar mppts are active or during the day. When mppt are not active, nighttime the switchover is seemless
My setup
Ess configured without battery life
2 mppts 150/85
6 JA 545watt panels
1 pylontech UP5000
Quattro firmware version-500
Cerbo firmware version- 2.92
Mppt firmware 3.13
Any ideas on what the issues might?
Any guidance would be appreciated