This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi. I've just installed VictronConnect to my iphone. It sees the unit and a lot of data is there, all apart from the most important bit - battery percentage! This is displayed on the Victron box so why not the App. Surely I must be doing something odd as it's really the only piece of info I need.
Any ideas? Thanks.
Can you make some pictures/screenshots?
I think you are just connecting to the MPPT inside of the EasySolar but you have to connect to the remote console of the GX device.
https://www.victronenergy.com/media/pg/Cerbo_GX/en/accessing-the-gx-device.html
As I thought...
1. You just connecting to the MPPT inside of the EasySolar and the MPPT doesn't have any information about the SOC.
2. The old CCGX don't have Bluetooth to connect to it you have to connect it to your LAN/WLAN and the VRM Portal.
You may want to have a look at the CCGX manual first before you start ranting.
https://www.victronenergy.com/media/pg/CCGX/en/index-en.html
