This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, after retuning from work onto my narrowboat I noticed the battery monitor was not showing the state of charge % but is now showing _ _ _ I have fully charged the batteries and pressed Synchronize but the monitor still shows _ _ _ Any advice would be appreciated,
The readout overview in the picture is the temp display.
If you don't have a temp sensor then there is no reading to display hence the ---.
Thanks for the reply Alexandra. The monitor displayed the State of Charge % when I left for work which is something I check daily, why it has suddenly decided to show _ _ _ and temp on the screen is a mystery to me and was wondering if there is a way of getting the SoC % back on display.
Thanks all, I re-set the BMV and it solved the problem.
