This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I only get 1000W from my generator when it's charging my bank via two MultiPlus 48/1200 units connected in parallel. Is that the limit of the units or have I got something set up wrong?
Changing the generator curretn limit (either up or down) does nothing! I don't get it - please help!
It has a 13A charger. So you are seeing the max it can do.
16A transfer and 13A charger.
Hi @Mark Hicks
That '13' in the model name is it's rating for charge Amps at battery V. They may hover a little below that in practice. So maybe 700W for each unit.
But they may not come set at the full allowance. This used to be common practice, so check that the Charge setting is where you want it. Note that's not the genset limit.
If this isn't the reason there may be something else at play, like genset power quality, or the settings you're using to get the genset accepted. We'd need to know more about what you're doing to be able to offer much more help.
I have 5 Pylontech US3000C, the 2 Multiplus units and 2 PV arrays built around a Cerbo GX.
