How can I change "Scheduled charging" in Node-Red?
eg: /settings/0/Settings/CGwacs/BatteryLife/Schedule/Charge/0/Soc to 80%?
asked
"Scheduled charging" and Node-Red
Assuming this is referring to the local settings service com.victronenergy.settings then an exec node with
dbus-send --system --print-reply --dest=com.victronenergy.settings /settings/0/Settings/CGwacs/BatteryLife/Schedule/Charge/0/Soc com.victronenergy.BusItem.SetValue variant:int32:80
Hi, thanks for this. It's exactly what I needed. I had to use the slightly amended command to make it work on my Cerbo GX
- dbus-send --system --print-reply --dest=com.victronenergy.settings /Settings/CGwacs/BatteryLife/Schedule/Charge/0/Soc com.victronenergy.BusItem.SetValue variant:int32:80
Would you be able to give me a couple of pointers on how to adapt this code to allow me to enable a scheduled charge via Node-Red?
Basically to enable a scheduled charge when SoC drops below a certain level, at a certain time of day.
Thanks in advance.
From node-red-contrib-victron version 1.4.33 and onwards you can also use the ESS control node to do this (https://github.com/victronenergy/node-red-contrib-victron/wiki/Available-nodes#ess), using Schedule 1: State of charge (%).
Hi again, I have looked via Node-red "manage palette" but the latest version seems to be only 1.4.32. and I'm not totally sure how to install new nodes nodes via Github. Do I download from Github and import the JSON file only (doesn't seem a big enough file) or is it more complicated than that ?
The node-red-contrib-victron version is updated with the Venus firmware. The latest candidate firmware ships with version 1.4.33.
So updating the Venus OS will take care of the package. Manually updating node-red-contrib-victron is not recommended.
Hi, where can I find these both in Node-RED? I looked for it, but didn't find...
1. Read the scheduled charching state:
2. Write activate/deacitvate scheduled charging:
You will probably need to send dbus commands from nodered using exec node. Use dbus-spy from the shell to locate the service names and appropriate dbus paths for those settings.
e.g. I set the logging interval with an exec node with command:
dbus-send --system --print-reply --dest=com.victronenergy.settings /Settings/Vrmlogger/LogInterval com.victronenergy.BusItem.SetValue
and append the msg payload containing the interval.
Thanks, I'll have to read up on the matter first. I'm still an absolute Node-RED newbie, I haven't dealt with dbus commands yet...
But it's a pity that dbus commands seem to be required for this, because all the settings for scheduled charching are directly accessible via Victron Node-RED nodes (target SOC, start time and duration, etc...), but these two values are obviously not ...
@Dirk-Jan Faber (Victron Energy) there really isn't an easier way?
The easiest way at the moment is using the custom output node. With that node you can just select the service and path to read from or write to.
The Node-RED implementation of Dynamic ESS (https://github.com/victronenergy/dynamic-ess) project uses the same system for writing the schedule.
You could probably modify this
https://github.com/victronenergy/node-red-contrib-victron/blob/master/src/services/services.json
to add the missing values. It should be somewhere lurking around on the filesystem.
There is no longer a need for editing that file if you use the custom input/output node.
Eventually most dbus paths will end up in the specific nodes. While they are not there yet, use the custom nodes. See https://github.com/victronenergy/node-red-contrib-victron#custom-nodes for more info on those.
Thanks, but unfortunately I'm completely overwhelmed with that... I use the Victron nodes, but unfortunately modifying them is too much for me
Me too!
What is the Node-Red way to "activate scheduled charge no.4 at 10pm if battery is below x% SoC" with a standard Victron node (no coding required) ?
I've put an example up on https://gist.github.com/dirkjanfaber/941e34378733a668fbb4bb645f4b3fdc
At least that is one way of doing it.
Great, I will have a go with that.
Thanks,
Thanks to @Dirk-Jan Faber (Victron Energy) I've programmed my battery to switch off via NodeRed by using a "dummy" scheduled charge at a certain time window along with other conditions SoC etc.
