question

mryoshii avatar image
mryoshii asked

VE.Bus Error 11 Not sure if there is an error.

L1 and N were swapped during the installation. However, this has been fixed. Nevertheless, this is displayed. Everything seems to work with the MP2. Is this an error log or is this an actual error?
1671396544937.png1671396577737.png1671396590964.png1671396602976.png

ESSvebuserror 11
1671396544937.png (23.0 KiB)
1671396577737.png (15.7 KiB)
1671396590964.png (15.8 KiB)
1671396602976.png (18.6 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @MrYoshii,

That is indeed a log of the last error.

The user interface isn't the clearest with that, but there is no doubt when the alarm is active - the unit will not work and the there will be active (and likely audible alarms) in the notifications screen of the GX device and on VRM.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mryoshii avatar image mryoshii commented ·

ahh ok thanks for the info. Is it possible to clean this log?

0 Likes 0 ·

Related Resources

What is ESS training video

ESS Quick Installation Guide

ESS design and installation manual

Additional resources still need to be added for this topic