question

Michelle Konzack avatar image
Michelle Konzack asked

Victron Wall box and KIA EV6

Good day,

currently I drive a KIA EV6 and the manual is realy strange.


Hence my question here:


Is it true, that the KIA EV6 can not be charged for a Victron Wall box configured in Singel Phase and connected to a MultiPlus-II 24/5000?


Thanks for your help

Michelle

ev charging station
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Lucian Popescu (Victron Energy Staff) avatar image
Lucian Popescu (Victron Energy Staff) answered ·

Hi, it should charge

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Michelle Konzack avatar image
Michelle Konzack answered ·

The KIA seller claim, that it will only charge with 1,5kW. This is realy strange, because I had last year 3 different EVs tried and all three where charging perfectly trough the 16A Schuko socket and the 230V/Type2 charging adapter cable.


Maybe I should contact KIA direct.


Because if the Wallbox get the 1.25 update and I can use the Solarenergy/Windenergy whilst the batteries are full, the MultiPlus can push the whole surplus of the panels into the car.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lucian Popescu (Victron Energy Staff) avatar image Lucian Popescu (Victron Energy Staff) ♦♦ commented ·
It is charging like any other AC charging station, so I don't see any reason for not charging
0 Likes 0 ·