This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have a generator connected to the AC input 1 on the Quattro. It connects fine and the power switches over fine. However, when the generator is turned off the hertz on the Quattro Output 1 drop from 60hz to 45hz and then slowly over 10-15 seconds climb back up to 60hz. Any ideas on what may be causing this and a solution to fix it.
If you switch off the generator it's voltage and frequency drops and the Quattro tries to follow the within it's grid settings before it disconnects the input.
e.g. there is an option "accept wide frequency range" 45-65Hz
I'll have to try turning that option off and see if it helps. Thanks.
