question

mcpsych61 avatar image
mcpsych61 asked

My smartsolar says zero but my over test at 120 v on the input point

73c758a4-73cf-40ba-8ac0-eb2b6173f141.jpegI have zero charge in my smartsolar yet my panels are testing at approx 120v

smart solar charging behaviour
73c758a4-73cf-40ba-8ac0-eb2b6173f141.jpeg (3.6 MiB)
3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
@Mcpsych61

Are you sure you havent clamped on insulation? Or reversed polarity.

0 Likes 0 ·
Show more comments
1 Answer
mcpsych61 avatar image
mcpsych61 answered ·

The cable entry to the charger was where I tested the voltage

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic