Hello,
I'm finalising the schematics of an upgrade (from AGM) to Smart Lithium with VE Bus BMSv2, Cerbo, etc. The Cerbo connects to the BMS, the BMS to the Multiplus. The Phoenix IP43 connects to the Cerbo via VE Direct (as do the MPPTs)
Question: with DVCC enabled, will the Cerbo 'control' the charge output of the Phoenix IP43, as it does for the MPPTs (and Multiplus)? This is not specifically mentioned in the DVCC section of the Cerbo manual (section 8.3), it mentions the MPPTs and "inverter/chargers" (=Multiplus) only.
This is important as the Phoenix IP43 would then not require a Battery Protect (similarly, no Battery Protects for MPPTs as these are connected to Cerbo for control/protection).
thank you,
Joao