question

mryoshii avatar image
mryoshii asked

Multiplus 2 left over after upgrade, what to do with it?

I have upgraded my MP2 24 3000 to a 5000.
Now I wonder what I can do with this MP2. Do you have any ideas? Or should I just sell it?

Multiplus-IIVRM
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Warwick Bruce Chapman avatar image
Warwick Bruce Chapman answered ·

This "Multi" in MultiPlus refers to it being multifunctional in that it is a "charger" and an "inverter".


You could thus come up with uses for either a charger or an inverter.


One possible such use would involve connecting the second MultiPlus AC Input to a generator and connecting it to the same DC bus as your 5kVA. Connect it to your GX device with an MK3 USB and then use it as a battery charger - and you can tune the VE.Configure settings accordingly so the AC Input accepts the generator.


You then end up with a site like this (pretend the Quattro is a MultiPlus-II 5kVA). The MP2 3kVA will show as charging when the generator is running and you can remote start the generator based on SoC from the GX:

1670585141602.png


1670585141602.png (160.3 KiB)
2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mryoshii avatar image mryoshii commented ·

Thanks for your command, but a generator is unfortunately not an option since fuel prices are extremely high in my area.


0 Likes 0 ·
Show more comments