I installed the Guimods in the Cerbo. I don't want to have some of the sensors displayed in the overview. I've tried a lot of settings, but I can't do it.
Anyone have advice?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I installed the Guimods in the Cerbo. I don't want to have some of the sensors displayed in the overview. I've tried a lot of settings, but I can't do it.
Anyone have advice?
Hi, did you find any solution for this? I have the same problem, lots of temperature sensors and some of them I do not want/need on the overview pages, but I cannot disable/delete them either because I want to use them in some node.Red automation.
Would be great if I could choose whether a certain temperature sensor should be included in the overview pages or not (and may other sensors like tank sensors too).
Unfortunately, this isn't easy due to the way temp and tanks objects are created and are dynamic, and the source code is not open source at least that I have found.
I could do something ugly like looking for a custom name starting with - or something like that but ... it's ugly. Also, not all tanks and temps support custom names.
Victron temperature sensor disambiguation table - which product supports which sensor
Additional resources still need to be added for this topic
55 People are following this question.