This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi!
I have three phase system running with three Multiplus-II and Pylontech Batteries. I added ESS assistant to all of the Multis. Now Im getting "Grid Alarm: Grid Lost" error all the time.
I tried to find solutions but had no luck. I would like to keep the batteries charged from the grid.
If any other info needed pls tell. Thank you!
The system doesnt have any separate meter. I have that AC current sensor. So should it be installed? Or do I need something else?
Yes i believe you need to either use the AC current sensor or a seperate energy meter so that the system knows how much is coming to/from the grid.
Apologies I'm unfamiliar with 3 phase systems, with single phase it should be as simple as attaching the AC current sensor and setting it up as such in cerbo gx. I assume it's similar for three phase but I've no experience with three phase so unsure if there's any extra steps required.
