question

sebastian-w avatar image
sebastian-w asked

Venus GX - Configure and Firmware update

Is it possible via the Venus GX to configure and firmware update the following:

- BlueSolar MPPT 100/30
- MulitiPlus 12/120/3000 16
- BMV-700

MultiPlus Quattro Inverter ChargerBMV Battery MonitorVenus GX - VGXBlueSolar PWM
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

MultiPlus, cannot do remote firmware updates, but configuration is possible using Remote VE,Configure (at the bottom of the Devices page on VRM).
MPPT and BMV (VE.Direct devices) can do remote firmware updates via VRM.
On VRM, select the devices page and at the bottom will be the option for "Firmware Update"
Make sure that Two Way Communication with VRM is enabled on the Venus GX.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sebastian-w avatar image sebastian-w commented ·

So it's only possible to firmware update the MultiPlus via the Interface MK3-USB (VE.Bus to USB) - ASS030140000?

0 Likes 0 ·
wkirby avatar image wkirby ♦♦ sebastian-w commented ·

Yes, currently that is the only way. Using the MK3-USB adapter and VE.Flash software (part of the VE.Configure suite).

0 Likes 0 ·
Show more comments