Hello peolple, in the victron manuals, it specifies that the installation must be done with flexible multifilament cable.
Each of the filaments must have a diameter less than 0.4 mm (0.016 inches) or a section less than 0.125 mm² (AWG26).
For example, a 25 mm² cable must have at least 196 strands (class 5 strand or higher according to VDE 0295, IEC 60228 and BS6360 standards). An AWG2 gauge wire should have at least a 259/26 strand (259 strands of AWG26). Example of a suitable cable: triple-approved class 5 cable (complies with three standards: the American (UL), the Canadian (CSA) and the British (BS)).
Where can I find this type of cable? In all the places I have asked, they do not know what type of cable it is (and I have asked in all kinds of places...reference electrical stores...on multiple internet pages. ..etc)
Regards