question

ako avatar image
ako asked

Multiplus ignores Temperature compensation DVCC from Cerbo

I have set DVCC on my Cerbo GX to share its temperature and selected temperature sensor 1 . Have checked the sensor is giving the correct temperature but the Multiplus still transitions from Bulk to Absorption at the normal set point for 25c which is 28.8 volts when the temperature is 10c degrees lower so should not end Bulk until 29.4 . Is this a knows issue or is there anything can do to correct this ..

temperature compensation
5 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Paul B avatar image Paul B commented ·

what is the battery type set to in the multiplus



0 Likes 0 ·
Show more comments
0 Answers

Related Resources

Additional resources still need to be added for this topic