question

Hugo Russouw avatar image
Hugo Russouw asked

How do I get the Pylon Tech Battery to list under devices on my Venus GX?

How do I get the Pylon Tech Battery to list under devices on my Venus GX?

The devices in the system.

  1. MultiPlus-II 48/5000/70
  2. Venus GX
  3. SmartSolar 250/100
  4. Pylon US2000B x5

I have the latest firmware on the Venus GX and the MultiPlus.

Should I change the baudrate on the pylontech battery?

Should I turn the batteries Off and back On after connecting to the Venus?

I did have the CANbus cable the wrong way round to start off but this is now fixed.

Any idea?




Pylontech
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

georgelza avatar image georgelza commented ·

Same question, note for my installation the installer already installed a non Pylontech cable to enable communication between MultiPlus II and my 2 x US2000 Plus batteries.
G

0 Likes 0 ·
4 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Murray van Graan avatar image
Murray van Graan answered ·
  1. Go to settings>services and set the baud rate to 500kbps for pylon. The pylon needs to be plugged in using the correct cable to CanBus on the Venus device and the can port on the master battery of the Pylontech bank. The master is the one of which the link port 0 is not used
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Hugo Russouw avatar image
Hugo Russouw answered ·

Should I reboot the Venus GX after making changes to the setup or will it list the pylon batteries without rebooting?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Guy Stewart (Victron Community Manager) avatar image Guy Stewart (Victron Community Manager) ♦♦ commented ·

A reboot is not necessary, but can’t hurt.

0 Likes 0 ·
Hugo Russouw avatar image
Hugo Russouw answered ·

Ok.

I found the problem.

The cable supplied by Pylontech is not correct.

Made my own cable.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Guy Stewart (Victron Community Manager) avatar image Guy Stewart (Victron Community Manager) ♦♦ commented ·

Thanks for reporting back. I will update the documentation.

0 Likes 0 ·
harryc avatar image harryc commented ·

Hi

Please send me the pin-out of the cable you made.

0 Likes 0 ·
Show more comments