question

Lindsay avatar image
Lindsay asked

Configuring a Three Phase

We have connected a three phase 5KVA multiplus-II system.

the inverters are updated, now we want to configure them, we doing so without wiring the AC in but with the 480V battery wired up.

when we switch on the first one its ok but when the second one is switched on it starts beeping and the "absorption LED" lights up same with the third inverter, and we get error code 3.

Any assistance will be appreciated.



Multiplus-IIVEConfigure 3multi phase
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·
5 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lindsay avatar image Lindsay commented ·

@Matthias Lange - DE

Thank you for your response, i have gone through the manual and the rest when i do power it on I am getting Error code 3.


please see the attached it's my network diagram. (also it's a 46V not a 460(typing error))

1669031899896.png

0 Likes 0 ·
1669031899896.png (171.1 KiB)
Show more comments
suggarman avatar image
suggarman answered ·

I hope the battery is 48V and not 480V :-)

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lindsay avatar image Lindsay commented ·
@suggarman

my bad (typing error) it is a 48V

0 Likes 0 ·