I own a generator (BXGND6300E diesel with AVR) which like many others is only accepted by my
Multiplus 2 48/5000 if Weak AC is selected in VEConfigure.
I have read the generator FAQ and have experimented with different settings on the Multiplus as well as a stabilizing load (400W construction light) on the generator parallel to the Multiplus connection,
but the output of the generator seems to be of too low quality for the charger.
Here are my questions:
1. With Wéak AC the generator shows a load of 2.800W while the Multiplus charges the battery with only 2.000W.
There is no other load connected to the generator or the Multiplus AC out. That means that 800W disappear somewhere inside the Multiplus. It is also running quite noisy in that configuration.
That cannot be a healthy state for the Multiplus. Is this not detrimental to the inverter / charger?
2. I do not think I can configure the Multiplus to accept the generator output as it is (without Weak AC).
So I want to improve the generator output, might be possible since the generator itself is quite powerful.
To do that however, I must know, what is the problem with the generator voltage / frequency.
Where can I get that information in my Victron system (Cerbo GX, Multiplus 2 48/5000, 2x Pylontech US3000C)?
Thanks in advance,
Winfried