Hello all,
I have a small solar system with buffer battery:
1 x solar cell 410 W
1x SmartSolar MPPT 100/20
1x SamartShunt 500A/50mV
1x Battery 12V 28Ah
1x MultiPlus 12/800/35
Everything is connected to a RaspberryPi with VictronOS via USB cable
2x Ve.Direct to the SmartSolar and SmartShunt
1x Ve.Bus to the MultiPlus
============================
ESS is selected as configuration on the MultiPlus and DC power supply.
Connected on the MultiPlus:
AC input - Grid supply
AC output - continuous load of approx. 200-400W
============================
The following problem has now come up:
When the SmartSolar is connected to the Raspberry, it switches to state: externally controlled and shuts down. If at all 5W - 20W come through. If I disconnect the VD.Direct and restart the SmartSolar, it delivers the full PV power.
Does anyone have an idea?
If desired, I can also provide RemoteDesktop (AnyDesk) if someone wants to look at it.
Many thanks in advance.
I am grateful for any idea! ;)
