question

chainmaster avatar image
chainmaster asked

Ve-configure not working with new file format

Hi there,
i am just working on an Easysolar.
I did the firmware update right now via VRM. So far so good.
But since then the VE-configure program is not working anymore.
The new file format can not be opened and changed.
I downloaded the config file via VRM to my (Linux)computer onto a USB stick.
To change the settings i have to use a (borrowed) Windows computer and use the VE-Configure Tool there, then save the file back to the USB-device and re-upload it onto the Easy via VRM connection.

Up to last weed this (annoying) procedere worked at least.
Since the firmware update the new fileformat can not to be opened on the VE-configure tool.

I guess the system ist running right now, VRM shows its working, but how can i make changes in the setup, especially ESS and or virtual switch?

VEConfigure 3
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Do you get an error message?
Can you upload the config file here?

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

chainmaster avatar image chainmaster commented ·

Hello Matthias,

thank you for the answer. I found out quite a lot by myself.

The config files have two different endings. There are .rvsc files and

.rvms files.

I could only see this on my Linux computer but not on the shitty Windows stuff, where I can only see colorful icons.

Obviously Ve-configure can open .rvsc files and I can edit these filetypes.

So how can I send the config file to you? I think there is a fault in my configuration but I dont see what I did wrong :-))

0 Likes 0 ·
Matthias Lange - DE avatar image Matthias Lange - DE ♦ chainmaster commented ·
Is it a system with more than one VE.Bus device? If yes you need to use the "VE.Bus System Configurator"

Normally Windows should open that automatically if you double click on the downloaded file.

0 Likes 0 ·
Show more comments
chainmaster avatar image
chainmaster answered ·

I solved the problem, this question can be closed

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Curtis avatar image Curtis commented ·

Care to share how you solved it?

0 Likes 0 ·