question

oxy-1 avatar image
oxy-1 asked

Read individual cell status with Victron VE.Bus BMS and SmartLithium

Hi, since I see solutions (https://github.com/Louisvdw/dbus-serialbattery) with super cheap BMS devices that show individual cell voltages on the cerbo as well as temperature readings of batteries, I wonder if my victron VE.Bus BMS connected to my two victron SmartLithiums also can offer this information somehow on the cerbo?

I know that I can see it in the app directly red out from the battery itself. My batteries are currently a bit unbalanced and I want to monitor them closely. They are not exactly close by, so a remote readout would be very nice!

BMS
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

@oxy

Unfortunately this is not possible as the BTV cables connecting the battery to the BMS do not provide this information.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jjduke avatar image jjduke commented ·
It is ironic that my GX can see the third-party temperature sensors (Ruuvi) and report the info through VRM, but it won’t show me ancillary battery data through the Venus GX or in VRM which I can see with VictronConnect when in BLuetooth range. I know more about the temperature and humidity in my refrigerator than I do my batteries when I am not on the boat…it seems more like a conscious decision not to relay this information to the user than a technical hurdle—at least if the batteries are within Bluetooth range of the Cerbo.
0 Likes 0 ·