Why am I getting "Battery temperature too high on Solar Charger" alarm on SmartSolar when there is no temperature sensor installed?
I have 2 SmartSolar 150/70 VE Can paired with one BMV-712 that monitors only voltage and connected to Cerbo GX. BMV and chargers are also connected by VE.Smart networking sharing battery voltage to chargers and synced charging.
I have discovered that chargers (both) started receiving battery temperature from BMV, but there is no temperature sensor installed nor configured (None in settings). In BMV there is not temerature sharing visible, so chargers recieve it but nothing is transmitting.
I have fixed it by removing all devices from VE.Smart and connecting again, however when this occurs, it stops charging at all and that could be real issue.