This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
The Multiplus 3kva spec sheet states 2400w at 25deg C and 2200w at 40deg C. Does the derating start at 40? or is it a linear progression starting at 26 and up?
I have sensitive equipment that will need 2700va of power at its max (but much lower continuous) and need to correctly plan if the Multiplus 3kVa is suitable.
The deratings are specified for an ambient air temp., which the units do not measure, I assume. So, how valid are these deratings? The units measure the temp at some internal location (heatsink etc) and apply a measured correlation to ambient?
