question

cmos avatar image
cmos asked

Blue Smart ip65 charger recond mode

In recond mode battery voltage 14.4 V.Not higher.

I thought it will be around 16 V.

Is my charger faulty?

charger
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi @cmos, welcome to community!

The charger will only increase the voltage once the charge current has dropped to an acceptable level (ie. when the battery has been sufficiently charged to start reconditioning). See the manual for the actual levels.


5 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

cmos avatar image cmos commented ·

Thanks,if i repeat a few cycles of charge,recond will work?

0 Likes 0 ·
mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ cmos commented ·

It might help yes. It depends on the size of the battery too.

0 Likes 0 ·
Show more comments
cmos avatar image
cmos answered ·

I thought if recond mode is selected,battery voltage will be around 16 V after abs stage.But nothing changed.LED recond blinking but voltage 14.4 and 0.5 amps.Restart cycles twice.

(Sorry for my bad English)

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic