Hello,
I have a Cerbo GX.
I would like to use my Siemens PAC2200 as grid meter for my GX.
Is there someone how has experice white this and help me connect this by modbus TCP?
Regards, Niels
asked
Siemens PAC2200 Grid Meter Modbus TCP
Only the Carlo Gavazzi energy meters are supported.
https://www.victronenergy.com/upload/documents/Datasheet-Energy-Meters-overview-EN.pdf
I also failed to mention that support for ABB B series meters has recently been added.
1) Add support for ABB B-series meters, for use in ESS. Three types:
- B21: Single phase meter up to 65A. Same size as the ET112, but it has a small LCD screen.
- B23: Three phase meter, internal shunt, up to 65A per phase. Same size as the EM24 (70mm wide).
- B24: Three phase meter, external CTs. Same size as B23. Ratio configurable, up to 1000A per phase.
There is a project here https://community.victronenergy.com/idea/114716/power-meter-lib-for-modbus-rtu-based-meters-from-a.html to develop a library to support multiple meters.
It may be possible to join that project to develop the support needed for your meter.
You suggested Link does not relate to Modbus TCP, but Modbus RTU/RS485 and Conversion of RTU/RS485 to Tcp as a carrier layer and re-converting it back to RTU/rs485
Hello all,
I am also very interested in the solution with the Siemens PAC2200 Modbus TCP and Victron.
I do not understand why it does not work?
Because it is TCP.
I thinks it's better then RS485
Bye spooner
