Hello,
I am curious about connecting a Cerbo GX to solar panels.
What is required to do this?
I suspect current transformers are required.
Which current transformers? How are they physically connected to the Cerbo GX?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
I am curious about connecting a Cerbo GX to solar panels.
What is required to do this?
I suspect current transformers are required.
Which current transformers? How are they physically connected to the Cerbo GX?
I am assuming you mean particulary for communication and data recording specifically here? (Stranger questions have been asked)
You can use a smart shunt or bmv like a dc energy meter for the output of the mppt to the battery. That connects with VE direct to the GX.
Hi Alexandra,
This would be mainly for monitoring, communication, instantaneous data, and past data.
So if I understand your answer a smart shunt or BMV between the (positive? cable of the) solar panels connected to the VE direct connector of the Cerbo GX without using a current transformer.
If I was to make a bill of materials, would it look like this:
How many amperes and volts DC will this arrangement manage?
1. Battery
2. Shunt (BMV or Smartshunt for monitoring battery current)
3. Charge Controller (MPPT).
4. Solar panels
Optional:
5. Cerbo GX
6. VE.Direct cables.
Cerbo GX is a data management internet gateway. It does not manage the electrical energy directly.
I would say no to direct solar panel to Cerbo connection. You need some amount of DC energy storage to maintain the Cerbo through the night (or cloudy skies). Plus the voltage from the solar array will vary substantially. Cerbo can tolerate a wide voltage range but ...
Can Cerbo with a shunt tolerate 300 VDC coming in from a solar array at less than 11-amps?
Can Cerbo accept an additional DC power supply from a small battery or power supply converter not connected to the solar panels to maintain it?
They are all designed for dc battery monitoring, not high voltage dc panel monitoring.
You will need to look more at other equipment not compatible to connectable to the cerbo.
Additional resources still need to be added for this topic
SmartShunt Installation Manual
45 People are following this question.