This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
As the title states the app is App not showing "average discharge" numbers? it has been like this since the first installation over a year ago, i have done all the updates ect, it seems other people are having the same issue, I was hoping this would have been sorted out by now.
Any ideas please?
I also have the same problem as I have never needed to go below 65% SOC as yet.
It would be very useful if these thresholds could be user configurable rather than preset...
Hi Nexxo,
the "Average discharge" is directly connected to the "Total charge cycles" counter. If it is zero then the average discharge value is also zero.
I have learned (from the manual) that it is only a charge cycle if the batteries are discharged to <65% and charged up again to <90%.
Regards
Rainer
Thanks for the reply Rainer, this is not really the best use of a display from Victron, i want to purchase a new Lifepo4 but don't want to waste my money getting a battery with too many ah if i don't need it hence i was hoping the monitor would be helping me out, Not so, not even any last 30 days history so i can get an idea. Pretty poor purchase this has turned out to be :(
Seems a pointless purchase, any other products that might work better than this?
I have set my batteries 300ah capacity to 40ah and now i can see the average ah's, my SOC is screwed up but hey ho it's a workaround
