This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
VRM is reporting incorrect figures. See screen shot. Same/similar numbers on CCGX.
There is no load on AC, despite what VRM says.
DC load is actually about 3-15W, one LED plus an Orion feeding a 12V battery at 1A. Fan is running on the Easysolar.
Numbers are usually reasonable, when there's no shore power.
Easysolar 24/1600
CCGX
Orion 24/12 (can't remember the amperage)
Those levels as so low that I am not surprised.
This "nonexistent" AC-out load could be the EasySolar's power draw.
AC-out loads are not measured but calculated.
I have seen systems without DC-loads but when DC-load was selected the values on VRM for it were positive.
At that low power the efficiency of AC/DC conversion of MP is below 90%.
(850-36)x0.9=732.6
622+56=678
732.6-678=56.4 <- this is what you are "missing"
Having a shunt installed as a DC energy meter to measure the DC load made a huge difference to the accuracy of this measurement on our boat.
