My friend is at sea and is getting this error per screenshot. I have checked the manual but see no ref to #24 Any idea what the issue is?
asked
Lynx Ion + Shunt Error #24
@John Rushworth I assume that there are LFP180 batteries connected to the Lynx Ion plus Shunt?
If so, there is a problem with the balancing, a battery is not receiving balance power by the CAN-bus cable(60V) or inside the battery a fuse is defect.
If the battery contains the latest software then a LED on the battery will start blinking 2 times.
- Blinking 2 times, there is a fuse defect;
- invers blinking 2 times, there is no balance power received by CAN-bus cable(60V)
(invers blinking: LED is constant on and go's off x times)
Thanks. They are the 180s here. https://www.victronenergy.com/upload/documents/Datasheet-Lithium-ion-and-Lynx-Ion-EN.pdf
I didn’t think there were LEDs on the battery itself but I shall pass the info on. Where did you find that info as the manual shows no error #24?
