question

elewis33 avatar image
elewis33 asked

How to save a custom charge profile with Victron Blue Smart IP67?

I'm using the Victron Blue Smart IP67 12/25 charger and had to setup a custom charge profile, according to my battery supplier's instructions. I also use this same charger on a different smaller battery and want to use the standard Li-ion charge profile. Unfortunately when I switched to the standard Li-ion profile my custom settings went away, and they're no longer available to use.

Does anyone know if there's a way to save custom settings? I don't see anything in the manual, and I assume the answer is no. Maybe we can suggest a fix/change to the firmware to enable saving different custom profiles? Anyone know how we might be able to make that suggestion?

charger
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@elewis33

As with other chargers you can create custom presets under advanced. And name them.


9 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·

..

SVID_20221015_204503_1.mp4

0 Likes 0 ·
svid-20221015-204503-1.mp4 (3.3 MiB)
elewis33 avatar image elewis33 commented ·
I know how to create and save the custom settings. But when I switched the charger back to one of the presets the custom settings went away.

Or am I missing something here?


0 Likes 0 ·
Show more comments

Related Resources

Chargers.

Additional resources still need to be added for this topic