This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
i've a Cerbo GX did the Firmwareupdate from 2.89 to 2.91.
Set all my settings and doing a reboot. After the reboot all settings i've done are gone.
I noticed this kind of behavior also befor the update, sometimes (once a month f.e.) the Cerbo just "forgott" the settings and all where on default aggain.
Any suggestions?
Regards
Matthias
Try to check free space of your cerbo gx (SSH into cerbo and type df).
My /data partition was full and i had the same error as described above. It was not related to OS Version.
@Benjamin thank you very much. It was the data partition which was full with some logs. After deletion and reboot, everything works again.
Were you running custom code, or guimods, or Venus OS Large, or something like that?
Or was it just a standard Cerbo with nothing special?
Hello @mvader (Victron Energy) It was a simple pv inverter script fetching data from Solax. So my own fault and I could have figured it out myself. Hopefully this will help others. Perhaps a little disk usage warning would be nice.
Hi Matthias,
Thats not supposed to happen; and also not a known issue or problem.
Could you contact your dealer to get it replaced under warranty?
And please ask them to (as always) include a clear error description when making the RMA, include a link to this post on community and add that I asked for it to be returned for analysis.
Perhaps to make extra sure, please post the serial number here.
Sorry for the troubles!
Thanks! Matthijs
Hi Matthijs,
i alos made a small video of the behavior. Like you see, I switched back to 2.89 but now there is also this "bug" after reboot everything is lost.
Serialnumber of Cerbo: HQ2210926XW
I will return it via my dealer.
Regards Matthias
Hello,
was there a solution? I have the same Problem. I can change any setting, which will be lost after reboot.
Thank you
Markus
