Hello! After updating Multiplus 24/5000 to version 498, I can no longer use Victronconnect with MK3, it says unsupported firmware. How can it be solved? Thanks!

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

Andrei asked Oct 11, '22

VictronConnect

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2022-10-11T17:43:00Z

Matthias Lange - DE answered · Oct 11, 2022 at 05:43 PM

Do you need that one change that is in 498 (Update UK gridcode)? If not just go back to 497.

If you need it you might have to wait for a new VictronConnect version.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2022-10-11T17:50:58Z

Andrei answered · Oct 11, 2022 at 05:50 PM

Thanks for the reply!

I'm waiting for a new version of Victronconnect.

I configured the inverter with veconfig

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.