508cb1caec7d_inst_ttyO1_Interfaces_Mk2_Tunnel.zipMy Multiplus 12/3000 is disconnecting from the AC input, even though the input appears to be ok. The system connected for a few minutes, and was charging the batteries as well as supplying AC power. but it then disconnected. It would connect for a split second every few minutes then disconnect again. I have a power protection system which shows the AC input as being ok. I also have the Multiplus restricted to 14A input. The multiplus and Color Controller show no alarms or errors, and the lights on the front of the inverter all appear ok showing no errors. Any ideas what could be causing this, or what else I could try? I have attached a copy of the current VEConfig file I exported from VRM remote.