question

metz-producties avatar image
metz-producties asked

Sony IJ1004C communication with cerbo GX

Hello,

I've got a Sony IJ1004C and 2 IJ1001M.

Does the CAN communication work with Cerbo GX?

How is the cable connection setup?

The sony side is subd 9 pin and the cerbo gx RJ45.

Thanks

VE.Canrj45 cable
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@Metz Producties

It is not on the official supported list.

For the CAN to work you need to identify the CAN H and CAN L and GND on the Sony side. The Victron ones are here.

You can make up a cable and try, you might win especially if they use a bms from a known battery.

There is a thread with guys working with other BMSs if you are interested.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

metz-producties avatar image
metz-producties answered ·

Thanx Alexandra!

I can't write protocols, but I hope the communication will work on the pylontech US5000 protocol for example. Can I test it with a cerbo GX, without other devices (multiplus-II) connected?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic