Hi
I recently installed a Victron EV Charging station, close to an already existing Victron Solar installation (distance between Charging Station and Venus GX is approximately 15 metres)
The EV Charger works fine, but I could not connect it to the Venus GX. I did the Modbus TCP settings on both the charger page and the Venus page. when I go to the charger page I see all other components of the Solar system, But when I go to VRM I cannot see the EV Charger. there is an error message on the GX device, saying "Error processing function code 3, unit id 126, start address 40000, quantity 2, src 192.168.8.51: Modbus address 40000 is not registered"
How do I get this right?
I have attached screenshots for the error and the EV pageScreenshot_20220927_131855_com.android.chrome.jpgScreenshot_20220927_134328_com.android.chrome.jpg