question

peter-walker avatar image
peter-walker asked

Wrongly Displaying AC Loads - Critical Loads & Total Consumption

I have an ET112 on the Meter Tail / Main Incoming Mains supply (as we have an old dumb Sunnyboy Inverter also on the AC IN side of the MP II to measure accurate grid import / export. We also have an ET112 on the only AC Out inuse on the MP II which feeds the to the house distribution board. Getting a very odd display now. I only want to see AC Loads not Critical & Total. or even perhaps just Critical Loads .. but not 3 boxes .. any advice appreciated. Not certain why ET112 on output of MPII as seems to be able to measure that itself?

1664195299651.png

Here is my new system


1664196722964.jpeg

display
1664195299651.png (155.2 KiB)
1664196722964.jpeg (146.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

On the GX -> settings -> ESS, disable show AC loads, or something like that. Will consolidate the view.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

peter-walker avatar image peter-walker commented ·

Ty,


Don't have 'Show AC loads' do have Inverter AC Output in use ..


1664200996135.png

This does remove the 2 extra boxes but also then seems to ignore the meter


1664201136550.png


0 Likes 0 ·
1664200996135.png (44.5 KiB)
1664201136550.png (28.9 KiB)
Show more comments

Related Resources

Additional resources still need to be added for this topic