hi all, going to start wiring the inverter to batteries next weekend, victron manual recommends a 250a fuse to protect the inverter, ive got this, i am going to wire 2 lithium io batteries in series, these are 12.8v 100amp, eventually i will have 4 batteries wired 2s 2p. Should i have a fuse close to the battery positive terminal on the positive from the last battery to the inverter, or should i give both batteries their own fuse. If so what size, and whats the best way to protect the four batteries when that configuration is in place, i think i am going to get the lynx distributor as well, but i assume the batteries will need a fuse each