This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi
I am installing a Phoenix 12/250 ve direct inverter into a 1975 VW camper.
My question is where to connect the grounding terminal on the inverter? Should this just be connected to the vehicle chassis close to the inverter to ground it?
The leisure system is 2 x 200aH 6v batteries wired in series supplied from a CTEK ds250AS. The CTEK is fed from the alternator and a 100w solar panel.
Thanks.
The answer may be dictated by relevant standard and/or legislation in your area. If you can provide your location someone may be able to chime in.
Also is your camper negative or positive chassis?
Hi Kai. I'm in the UK.
The camper is a negative chassis.
To update the info, there is a separate 'shore' power connection - this is a double pole consumer unit fitted with a 16a plug for hook up at campsites. Other than being earthed to the chassis, the 240 shore power is completely separate - it feeds a ctek battery charger in the engine bay and a single 240v socket inside the camper and nothing else.
Many thanks
Mark
